AGGREGATE
GENERAL AND GEOMETRICAL PROPERTIES OF AGGREGATES
PRODUCT CATEGORY
AUTOMATIC PROGRAMMABLE MORTAR MIXER
50-MA472550 |
Automatic Programmable Mortar Mixer, 5 Liter Capacity - 220-240 V 50/60 Hz |
ORIGIN: TÜRKİYE
Standards: ASTM C305 | EN 196-1 ,196-3,1015-2,413-2,459-2-EN 12687-35
50-MA472550 |
Automatic Programmable Mortar Mixer, 5 Liter Capacity - 220-240 V 50/60 Hz |
ORIGIN: TÜRKİYE
Standards: ASTM C305 | EN 196-1 ,196-3,1015-2,413-2,459-2-EN 12687-35
AUTOMATIC PROGRAMMABLE MORTAR MIXER
The Automatic Programmable Mortar Mixer is designed to mix mortars and cement pastes to the requirements of EN 196-1, EN 196-3 and ASTM C305.
The mixing paddle has a planetary motion and is driven by a motor with a microprocessor based speed controller.
When the device automatic use option is selected; It mixes according to pre-programmed mixing programs in accordance with the cement and mortar preparation steps specified in international standards.
In the manual option, the machine can be used as a simple to operate, two-speed mixer.
Additionally, an automatic mixing program option where the user can define the time intervals for mixing has also been provided.
A safety switch is included to help set the mixing beater to the correct position to control the required clearance between the mixing blade and the bowl.
An automatic sand dispenser is attached to the side of the mixer and feeds the sand into the mixing bowl through an automatic command from the program controller, depending on the program selected.
A water dispenser assembly is also fitted to the side of the machine and allows the dispensing of pre-determined volumes of water for the requirements of EN 196 automatic.
The mixing paddle revolves at a rate of 140 and 285 (r.p.m. clockwise) with a planetary motion of 62 and 125(r.p.m. clockwise) in low speed.
Speeds (rpm) Paddle Mixing Head Shaft
Low (Manual Speed 1) 140 ± 5 62 ± 5
High (Manual Speed 2) 285 ± 10 125 ± 10
Technical Specifications for AUTOMATIC PROGRAMMABLE MORTAR MIXER
| Low Speeds (rpm) | Paddle: 140 ± 5 | Mixing Head Shaft: 62 ± 5 |
|---|---|---|
| High Speeds (rpm) | Paddle: 285 ± 10 | Mixing Head Shaft: 125 ± 10 |
| Bowl Capacity | 5 Litres | |
| Motor Rating | 180 watts | |
| Automatic Program 1 | EN 196-1 | |
| Automatic Program 2 | EN 196-3 | |
| Automatic Program 3 | ASTM C305 | |
| Manual Program | For the user to determine the ratio of sand, water, cement and mixing time of the sample to be prepared. | |
| Dimensions | 400x580x650 mm | |
| Weight (Approx) | 56 kg | |
| Power | 220-240 VAC, 50/60 Hz | |
ACCESSORIES AND SPARE PARTS FOR AUTOMATIC PROGRAMMABLE MORTAR MIXER
50-MA472580 |
Spare Bowl, 5 Liter Capacity |
50-MA472582 |
Spare Beater |